Gecko Aqua-Flo Flo-Master FMXP2 Spa Pump – 1.0 HP 2-Speed 115V (06610006-2040)

�� Gecko Aqua-Flo Flo-Master FMXP2 Spa Pump – 1.0 HP 2-Speed 115V (06610006-2040) Whisper-quiet dual-speed jet power engineered for demanding multi-jet spa systems �� Product Overview The Gecko Aqua-Flo Flo-Master FMXP2 (model 06610006-2040) is a high-performance dual-speed jet pump purpose-built for today’s large, multi-jet hot tubs and spas. Rated at 1.0 HP continuous output (1.5 BHP), this 48-frame pump delivers impressive flow rates and superior pressure while fitting the same compact footprint as standard spa pumps. Manufactured by Gecko Alliance — one of the industry’s leading spa equipment manufacturers — the FMXP2 series outperforms other 48-frame pumps on the market. The high-volumetric volute design produces whisper-quiet operation at both high and low speeds, giving you powerful jet action when you want it and energy-efficient filtration when you don’t. Running on 115V/60Hz, this pump is designed specifically for the North American market, and it ships complete with 2-inch MBT union fittings for straightforward installation. Backed by a 2-year manufacturer warranty, the FMXP2 is a trusted choice for both new builds and replacement installations across a wide range of hot tub brands. ⭐ Key Features ✅ 1.0 HP Continuous Output (1.5 BHP) – True rated horsepower for reliable, honest performance in multi-jet spa systems ✅ Dual-Speed Operation – High speed for powerful hydrotherapy jets; low speed for quiet, energy-efficient filtration cycles ✅ 48Y Frame (Thru-Bolt) – Industry-standard compact frame fits most existing spa pump compartments without modification ✅ 115V / 60Hz – North American electrical standard; compatible with standard 115V spa circuits ✅ 2-Inch MBT Ports (Suction & Discharge) – Large ports maximize water flow; Male Buttress Thread connections for secure, leak-free plumbing ✅ Side Discharge / Center Suction – Versatile plumbing configuration; wet end can be rotated to four positions for flexible installation ✅ High-Volumetric Volute Design – Engineered for whisper-quiet operation and maximum hydraulic efficiency ✅ Fine-Tuned Impeller – Precision-balanced for maximum water-moving efficiency at both speeds ✅ Unions Included – Ships with 2-inch compression fittings for easy installation and future maintenance access ✅ 2-Year Manufacturer Warranty – Backed by Gecko Alliance’s industry-leading quality assurance ⚙️ Technical Specifications Specification Value Model Number 06610006-2040 Manufacturer Aqua-Flo by Gecko (Gecko Alliance) Series Flo-Master FMXP2 (XP2) Pump Type Jet Pump Motor Power (Continuous) 1.0 HP Motor Power (BHP) 1.5 BHP Speed Settings 2-Speed (Dual) Flow Rate 140 GPM Voltage 115V Frequency 60 Hz High Speed Amperage 10.5 A Low Speed Amperage 3.2 A Frame Type 48Y (48 Frame Thru-Bolt) Discharge Port 2 inch MBT Suction Port 2 inch MBT Port OD (Outside Threads) 3 inches Discharge Position Side Suction Position Center Cord Type None (Hardwire) Unions Included Yes (2-inch compression fittings) Seal Type PS-200 Warranty 2 Years (Full Manufacturer Warranty) ⚡ Electrical Requirements Electrical Spec Requirement Supply Voltage 115V Frequency 60 Hz Phase Single Full Load Amps (High Speed) 10.5 A Full Load Amps (Low Speed) 3.2 A Bonding Wire No. 8 AWG (8.4 mm²) solid copper per NEC �� Compatibility Guide Frame & Plumbing Specifications: �� Frame: 48Y (48 Frame Thru-Bolt) �� Wet End Port Size: 2-inch MBT (suction and discharge) �� Port Outside Diameter: 3 inches (where threaded unions attach) �� Discharge: Side discharge (rotatable to 4 positions) �� Suction: Centre intake This Pump Replaces the Following Part Numbers: This model (06610006-2040) is a direct replacement or substitute for a wide range of OEM and aftermarket part numbers, including: 1-00-0094 5121-316 AF066100062040 06115000-1040 06610002-5 06614510-2 06615456-2 06615607-1 06617763-2 1-00-0133 101293 301631 34-402-2420 625244 630-6087 PRC9121X PUM22000045 R55MWFBH-0279 X320378 This pump also serves as a replacement for Wavemaster 4000 (1.0 HP), Wavemaster 6000, Wavemaster 7000 (33145 – 1.0 HP), Watkins 37334-02 (1.0 HP), Watkins 38944, Watkins 77407, and Caldera Spas “Relia-Flo” pumps. Always verify motor amp rating, voltage, discharge type, and fitting size before ordering. ⚠️ Compatibility Tip: Measure the outside diameter of your existing pump’s threaded intake and discharge connections. A measurement of approximately 3 inches indicates 2-inch ports, which is compatible with this pump. Also confirm your existing pump uses a 48-frame motor with thru-bolt mounting. ��️ Installation Requirements Mounting: Requirement Specification Mounting Position Below water level (flooded suction) required Base Solid, level surface Ventilation Keep motor openings free from debris and obstructions Access Provide adequate space around pump for inspections and maintenance Plumbing: Connection Size Suction 2 inch MBT (center) Discharge 2 inch MBT (side – rotatable to 4 positions) Union Type Compression fittings included (hand tighten only) Installation Notes: ⚠️ Pump must be installed below water level (flooded suction) — the volute must be completely filled with water before starting ⚠️ Never run pump dry — causes seal damage and potential motor failure ⚠️ Ensure proper grounding and bonding per NEC requirements (No. 8 AWG solid copper) ⚠️ GFCI protection is required by code for all hot tub and spa installations ⚠️ For compression fittings: hand tighten only — DO NOT use a wrench. DO NOT use thread seal tape (PTFE), Teflon compound, or any sealants on compression fittings ⚠️ For NPT threaded connections only: use Quick-Seal Teflon Thread Sealing Compound or sealants formulated specifically for plastics �� Maintenance Guide Routine Maintenance: Task Frequency Notes Check for leaks Monthly Inspect around seal plate and union connections Inspect union fittings Monthly Hand tighten if loose — do not use tools Keep motor vents clear Quarterly Remove any debris or obstructions from motor openings Check mounting bolts Quarterly Tighten if vibration has loosened them Inspect shaft seal Annually Replace at first sign of leakage Check amperage draw Annually Should match rated 10.5A (high) / 3.2A (low) Warning Signs — Replace Pump If: Unusual noise (grinding, screeching, or humming without starting) Water leaking from the shaft seal area Motor trips the circuit breaker repeatedly Noticeably reduced water flow despite clean filters Motor overheating and cycling on and off Seal Replacement: �� Seal Type: PS-200 (Part No. 92500150) �� Always replace the complete seal assembly (both ceramic and carbon sides) every time the pump is disassembled ⚠️ Replace the seal at the first sign of any water leakage from the seal area. Winterization: To prevent freeze damage, disconnect all electrical power, drain the pump and plumbing lines thoroughly, and clean out any debris. Store the pump in a dry, well-ventilated area or cover it to protect from the elements. �� Ideal Applications Application Suitability Notes ♨️ Hot tub jet pump Yes Primary or secondary jet pump for multi-jet spas ♨️ Spa booster pump Yes Additional jet power for large spa systems ♨️ Replacement pump Yes Direct replacement for many OEM 48-frame 1.0 HP pumps �� Whirlpool bath Yes When specified for bath applications (check product marking) ❓ Frequently Asked Questions Q: What horsepower is this pump? A: This pump is rated at 1.0 HP continuous output (also referred to as 1.5 BHP or brake horsepower). The continuous output rating of 1.0 HP represents the actual sustained power delivered during operation. Q: Will this fit my hot tub? A: This pump uses a 48Y frame (thru-bolt style) with 2-inch MBT connections on both suction and discharge. Measure the outside diameter of your existing pump’s threaded connections — if they measure approximately 3 inches, you have 2-inch ports. Also verify your existing pump has a 48-frame motor. If both match, this pump should be a compatible replacement. Q: What voltage does this pump require? A: 115V / 60Hz. Always verify your existing pump’s voltage before ordering. This pump is not compatible with 230V circuits. Using the wrong voltage will damage the motor. Q: Does this pump run on 115V or 230V? A: This specific model (06610006-2040) is a 115V pump. Gecko Alliance also manufactures 230V versions of the FMXP2 in higher horsepower ratings. Make sure to match the voltage of your current pump. Q: Is this a single or dual speed pump? A: This is a dual-speed (2-speed) pump. High speed provides full power for jet operation, while low speed offers quiet, energy-efficient circulation for filtration cycles. Q: What size are the ports? A: Both suction and discharge ports are 2-inch Male Buttress Thread (MBT). The outside diameter of the threaded connection measures approximately 3 inches. Suction is center-mounted; discharge is side-mounted and can be rotated to four positions. Q: What warranty is included? A: This pump is covered by a 2-year full manufacturer warranty from Gecko Alliance. Years three through five are covered on a prorated basis. Pump seals carry a 30-day warranty. Contact Parts4Tubs for full warranty terms and details. Q: How do I know if my pump needs replacing? A: Common signs include unusual noises (grinding, screeching, or humming), water leaking from the shaft seal, reduced jet pressure despite clean filters, the motor repeatedly tripping the circuit breaker, or the motor overheating and cycling on and off. Q: Do I need a GFCI breaker? A: Yes, GFCI (Ground Fault Circuit Interrupter) protection is required by the National Electrical Code (NEC) for all hot tub and spa installations. Q: Does this pump come with a power cord? A: No. This pump requires hardwire installation. A power cord is not included. All electrical connections must be performed by a licensed electrician in accordance with the NEC and local codes. The wiring diagram is located on the motor rating plate. Q: Can I rotate the discharge direction? A: Yes. The wet end can be rotated to four positions, allowing you to orient the side discharge to match your plumbing layout. �� Downloads & Resources �� Flo-Master XP2 Owner’s Manual (PDF) – Complete installation, operation, troubleshooting, and parts guide �� Aqua-Flo by Gecko Pumps Tech Sheet (PDF) – Manufacturer technical documentation for all Aqua-Flo pump series �� Replacement Parts Keep your FMXP2 pump running at peak performance with genuine Aqua-Flo replacement parts: Part Part Number Description Shaft Seal 92500150 PS-200 replacement seal assembly Impeller (1.0 HP) 91694110 FMXP2 1.0 HP impeller Volute (48 Frame) 92770705 XP2 series volute/casing, 48 frame Wear Ring 92830070 Flanged wear ring, XP2 series O-Ring (Volute, #164) 92200300 Volute o-ring seal Suction Cover 91231606 XP2 series suction cover, 2 inch, standard drain O-Ring (Drain Plug, #111) 92200060 Drain plug o-ring Drain Plug 92290070 1/4-18 NPSM wing drain plug Cover Screws 99730050 8-32 x 5/8 inch screws for suction cover O-Ring (#230) 92200210 Union connector o-ring Tail Piece (2 inch) 91431200 2-inch union tail piece Union Nut (2 inch) 91431150 2-inch union nut Compression Fitting Complete 52202000 Complete 2 inch x 2 inch compression fitting Barb Adapter 413-1201 1/4 inch MPT x 3/8 inch RB barb adapter Complete Wet End (1.0 HP) 91041608-000 Complete wet end assembly including volute, seal, impeller, wear ring, suction cover, and drain plug �� Why Choose the Gecko Aqua-Flo Flo-Master FMXP2 ✅ Superior 48-Frame Performance – Outperforms other 48-frame pumps on the market with higher shut-off head and greater flow ✅ Proven Reliability – Manufactured by Gecko Alliance, an industry leader with over 25 years of spa equipment expertise ✅ Whisper-Quiet Operation – High-volumetric volute design minimizes operational noise at both speeds ✅ Energy-Efficient Dual Speed – Low-speed mode reduces power consumption during filtration cycles, lowering operating costs ✅ Flexible Installation – Rotatable wet end, included unions, and standard 48-frame mounting make replacement straightforward ✅ Comprehensive Warranty – 2-year full manufacturer warranty with 5-year prorated coverage �� Why Buy from Parts4Tubs ✅ US-based support for American customers (Boca Raton, FL) ✅ Fast shipping across the United States ✅ Expert advice from spa and hot tub specialists ✅ Competitive pricing in USD ✅ Full warranty support ✅ Hassle-free returns ✅ Replacement seals, impellers, and wet end parts available ✅ Dedicated customer service team — buy from a person, not just the internet ✨ Summary The Gecko Aqua-Flo Flo-Master FMXP2 (06610006-2040) is a 1.0 HP, dual-speed, 115V jet pump designed to deliver powerful hydrotherapy performance in a compact 48-frame package. With 2-inch MBT connections, side discharge, center suction, and whisper-quiet operation, this pump is an ideal choice for both new installations and direct replacements across a wide range of hot tub brands. Backed by Gecko Alliance’s 2-year warranty and available with genuine replacement parts, order yours today from Parts4Tubs and enjoy reliable spa performance for years to come.