Briticom® SFP 10GB Multimode 300m Fibre Optic Transceivers are used to interface networking devices to fibre or copper networking cables in Telecom and data applications. Already bought this product from us? Share your experience on LinkedIn FEATURES APPLICATIONS TECHNICAL DATASHEET Optical interface compliant to IEEE 802.3ae 10GBASE-SR Electrical interface compliant to SFF-8431 Hot Pluggable 850nm VCSEL transmitter, PIN photo-detector Maximum link length of 300m on 2000MHz/km MMF Operating case temperature: Commerical: 0 to 70 °C , Industrial:-40 to 85 °C All-metal housing for superior EMI performance Advanced firmware allow customer system encryption information to be stored in transceiver Cost effective SFP solution, enables higher port densities and greater bandwidth 10GBASE-SR at 10.3125Gbps 10GBASE-SW at 9.953Gbps Other optical links Parameter Symbol Min. Typ. Max Unit Note Transmitter Center Wavelength λt 840 850 860 nm Spectral Width (RMS) Pm – – Note 1 nm Average Optical Power Pavg -6.5 – -0.5 dBm 2 Extinction Ratio ER – – – dB 3 Transmitter Dispertion Penalty TDP – – 3.9 dB Relative Intensity Noise – – -128 dB/Hz 12dB reflection Optical Return Loss – – 12 dB Receiver Center Wavelength λr 840 850 860 nm Receiver Sensitivity Psens – 11.1 dBm 4 Stressed Sensitivity in OMA – -7.5 dBm 4 Los function Los -30 -12 dBm Overload Pin – -1.0 dBm 4 Receiver Reflection – -12 dB Notes 1.Trade-offs are available between spectral width, center wavelength and minimum OMA, as shown in table 6. 2. The optical power is launched into MMF 3. Measured with a PRBS 231-1 test pattern @10.3125Gbps 4. Measured with a PRBS 231-1 test pattern @10.3125Gbps, BER≤10-12. SFP 10GB Multimode 300m DOWNLOAD DATASHEET
