BACKWASHING TURBIDEX SYSTEMS High Flow Rate Turbidity Removal Backwashing sediment filters are particularly popular for private water supplies or commercial applications, where there is a requirement for significant sediment removal at high flow rates. Once installed they require very little maintenance, with backwashes controlled on a timer basis, which can be set to occur ‘out of hours’ such as at 02:00am. Turbidex media has an average service life of 4-6 years before replacement is recommended, making it an extremely cost-effective solution compared to disposable filter cartridges or bags. Each system is supplied partially assembled with some of the valve programming already complete, onsite assembly and minimal programming (setting time of day) is required. Systems come as standard with Clack WS1 control valve, with 1” inlet and outlet. All systems require a gravel bed, with the specific volume of bedding gravel supplied as part of the kit. Why Use A Turbidex System?Our specialist Turbidex media is a step above traditional filtration sand, providing up to 100x the surface area which allows for higher flow rates, lower pressure drops and almost 3x longer service life between backwashes. The level of filtration offered by Turbidex is also far superior, filtering down to between 3-5 microns rather than around 400 microns offered by sand. Turbidex is an all-natural and sustainable Zeolite (also known as Clinoptilolite) media, giving peace of mind to the environmentally conscious and reassurance for those where backwash effluent will feed into a septic tank or soakaway. How Often Do I Need To Replace The Turbidex Filtration Media?Turbidex media offers a long service life of between 4-6 years before the media should be replaced. Signs that the media might be nearing the end of its life include an increase in turbidity, drop in flow rate or pressure and poor backwash performance, whereby backwashing no longer restores flow, pressure or water clarity. Why Choose Our Backwashing Turbidex Systems? Effective filter media that outperforms traditional filter sand Offers filtration at high flow rates down to just 3-5 micron High quality CE-marked PED 97/23/CE compliant vessel Suitable for high flow rates up to 4,800 Litres per hour Clack WS1 CI control valve for reliable operation Compatible Products:Turbidex Media Product Resources:Backwashing Turbidex Systems Data Sheet →Backwashing Turbidex Systems Product Manual → Product CodeSizeService Flow RateBackwash Flow RateBWT-105410″ x 54″1,500 Litres Per Hour1,900 Litres Per HourBWT-125212″ x 52″2,200 Litres Per Hour2,700 Litres Per HourBWT-135413″ x 54″2,500 Litres Per Hour3,100 Litres Per HourBWT-146514″ x 65″3,000 Litres Per Hour3,600 Litres Per HourBWT-166516″ x 65″3,700 Litres Per Hour4,800 Litres Per HourBWT-186518″ x 65″4,800 Litres Per Hour6,000 Litres Per Hour
