BACKWASHING CARBON FILTERS Chlorine, Colour & Organics Backwashing carbon filters are the go-to solution for high flow rate carbon filtration, where a traditional filter cartridge will not achieve the required flow rate. This makes them especially popular for use with private water supplies (such as boreholes, springs and wells) to remove several contaminants such as chlorine, heavy metals and VOCs. The ability to backwash the carbon bed provides a significantly longer lifespan than their cartridge equivalents, giving a service life of 3-5 years depending on water quality. Each system is supplied partially assembled with some of the valve programming already complete, meaning that some assembly will be required on site. Systems come as standard with a Clack WS1 control valve, featuring a 1” BSP inlet and outlet. How Often Do I Need To Replace The Carbon In These Backwashing Carbon Filters?It is recommended to replace the carbon media on average every 3-5 years, depending on water quality. If you start to notice chlorine breakthrough or the carbon media feels slimy, it should be replaced sooner. Why Choose Our Backwashing Carbon Filters? Programmed to backwash the carbon bed every 3 days High grade carbon suitable for drinking water uses Suitable for high flow rate RO pre-filtration Clack WS1 valve with 1″ inlet and outlet Supplied in a partially assembled kit Compatible Products:Granular Coconut Carbon Product CodeSizeFlow RateBWC-105410″ x 54″800 Litres Per HourBWC-125212″ x 52″1,400 Litres Per HourBWC-135413″ x 54″2,100 Litres Per HourBWC-146514″ x 65″2,400 Litres Per HourBWC-166516″ x 65″3,200 Litres Per HourBWC-186518″ x 65″4,000 Litres Per HourBWC-216021″ x 60″5,400 Litres Per HourBWC-246924″ x 69″6,500 Litres Per Hour *To target colour and organics removal deduct 80% from the specified flow rate
